Fosroc Nitobond EP In Jharkhand and Bihar

Buy Nitobond EP in Ranchi, Jamshedpur, Patna, Gaya, Bokaro, Dhandbad, Jharkhand and Bihar @ lowest rate.

For Quotation, Contact,

Mr. R. Prasad

Mob:07250852229

Email: rpenterprisejsr@gmail.com
Our Website www.rpejsr.com
            

                                  

Nitobond EP is based on solvent-free epoxy resins containing pigments and fine fillers. It is supplied as a two-part material in pre-weighed quantities ready for onsite mixing and use.
Coloured components, white base and green hardener, provide visual evidence that adequate mixing is achieved.

• Can be applied to dry or damp surfaces
• High mechanical strength
• Good positive adhesion
• Can be applied where a substrate/repair barrier is required
• Standard and slow set grades

Uses:

For bonding new cementitious materials to existing cementitious surfaces. For use on horizontal surfaces and on vertical surfaces where mortar or concrete can be supported by formwork. Ideal for extensions and repairs to structural concrete in buildings, loading bays, bridges, roads, bonded or granolithic floor toppings etc.

Fosroc Cebex 100 In Bihar

Buy Fosroc cebex 100 in Patna, Hajipur, Aurangabad, Gaya, Muzaffarpur  and across Bihar@ lowest rate.

Ask For Quotation, Contact,

Mr. R. Prasad

Email: rpenterprisejsr@gmail.com

Mobile:07250852229
Our Website www.rpe-jsr.com

                                         

Description:

Cebex 100 is supplied as a powder admixture. The material is a combination of a plasticising agent and a gas producing expansion medium.                                          

The plasticising agent allows the use of a reduced water/cement ratio with consequent increased strengths and durability. The expansive medium counteracts the natural settlement and plastic shrinkage of the grout and aids stability and cohesion.

Sufficient restrained expansion is developed to ensure a high degree of inter facial contact.

• Gaseous expansion system compensates for plastic shrinkage and settlement in properly designed cementitious grout.
• Reduced water/cement ratio in the grout mix ensures low permeability and long term durability in service.
• Gives high grout fluidity with low water/cement ratio, thus making placement or injection of the grout easy.
• No metallic iron content to corrode and cause staining or deterioration due to rust expansion in the grout.
• Composition allows high early strength development in grouts, without the use of chlorides.

Advantages:

• Gaseous expansion system compensates for plastic shrinkage and settlement in properly designed cementitious grout.
• Reduced water/cement ratio in the grout mix ensures low permeability and long term durability in service.
• Gives high grout fluidity with low water/cement ratio, thus making placement or injection of the grout easy.
• No metallic iron content to corrode and cause staining or deterioration due to rust expansion in the grout.
• Composition allows high early strength development in grouts, without the use of chlorides.

Fosroc Cebex 100 In Jharkhand

Buy Fosroc cebex 100 in Ranchi, jamshedpur, Bokaro, Dhanbad and across Jharkhand @ lowest rate.

Ask For Quotation, Contact,

Mr. R. Prasad

Email: rpenterprisejsr@gmail.com

Mobile:07250852229
Our Website www.rpejsr.com

                                         

Description:

Cebex 100 is supplied as a powder admixture. The material is a combination of a plasticising agent and a gas producing expansion medium.

The plasticising agent allows the use of a reduced water/cement ratio with consequent increased strengths and durability. The expansive medium counteracts the natural settlement and plastic shrinkage of the grout and aids stability and cohesion.

Sufficient restrained expansion is developed to ensure a high degree of inter facial contact.

• Gaseous expansion system compensates for plastic shrinkage and settlement in properly designed cementitious grout.
• Reduced water/cement ratio in the grout mix ensures low permeability and long term durability in service.
• Gives high grout fluidity with low water/cement ratio, thus making placement or injection of the grout easy.
• No metallic iron content to corrode and cause staining or deterioration due to rust expansion in the grout.
• Composition allows high early strength development in grouts, without the use of chlorides.

Advantages:

• Gaseous expansion system compensates for plastic shrinkage and settlement in properly designed cementitious grout.
• Reduced water/cement ratio in the grout mix ensures low permeability and long term durability in service.
• Gives high grout fluidity with low water/cement ratio, thus making placement or injection of the grout easy.
• No metallic iron content to corrode and cause staining or deterioration due to rust expansion in the grout.
• Composition allows high early strength development in grouts, without the use of chlorides.

Fosroc Brushbond RFX in Odisha

Buy Fosroc Brushbond RFX in odisha, Angul, Bhubhaneswar, Cuttack, Barbil, Joda, Rourkela, Jharsuguda, Sambalpur, Jharkhand at lowest rate.

For Quotation, Contact,
Email: rpenterprisejsr@gmail.com
Mr. R. Prasad
07250852229
Our Website www.rpe-jsr.com

Uses of Waterproof Coating:-

Brushbond RFX is an high performance elastomeric cementitious coating used for waterproofing and to protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen & water.

Brushbond RFX is suitable for all types of structures including those in coastal environments.

The product can be used on concrete, brick and blockwork substrates and is equally suitable for new and existing structures. The product is designed to reface and even out variations in concrete and masonry surfaces and bridge shrinkage cracks. It provides a seamless, flexible waterproof coating suitable for water tanks, reservoirs, drainage culverts basements and roofs. The product provides a tough durable water resistant coating which can withstand light pedestrian traffic and also has excellent weather resistance for exterior applications.

Advantages of Waterproof Coating:-

Excellent barrier to carbon dioxide, chloride and sulphate ions.

Allows water vapour to escape from the structure.

Waterproof-suitable for water retaining structures.

High resistance to the effect of long-term weathering, durable in all climate conditions including UV attack.

Non toxic - ideal for potable water tanks.

Flexible, with thermal expansion similar to concrete.

Excellent bond to concrete and masonry.

Good crack accommodation capacity.

Minimum surface preparation needed and low labour costs.

Standards Compliance of Waterproof Coating:-

Tested to ASTM D4060, ASTM D4541, ASTM D638, ASTM C836.

Description of Waterproof Coating:-

Brushbond RFX is a two component acrylic polymer modified cementitious coating which consists of Brushbond RFX powder and Brushbond RFX liquid acrylic emulsion. It requires only the addition of clean water at site to produce an easily brushable coating.
Brushbond RFX can simply be applied by stiff brush, roller or trowel to obtain the desired thickness.

Fosroc Conbextra GP2 in Patna

Buy Fosroc Conbextra GP2 in Patna at lowest price.

Ask for Quotation:
rpenterprisejsr@gmail.com
Contact Person: Mr. R. Prasad
Call : 07250852229

Our Website www.rpe-jsr.com

Conbextra® GP2

Free flow, high strength, non-shrink, cementitious precision grout

Description:

Conbextra GP2 is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for gap thicknesses up to 100mm.Conbextra GP2 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand ensures high early strength. The graded fillers are designed to assist uniform mixing and produce a consistent grout.

Uses:

Conbextra GP2 is used for precision grouting where it is essential to withstand static and dynamic loads. Typical applications would be the grouting of base plates of turbines, compressors, boiler feed pumps etc., It can also be used for anchoring a wide range of fixings. These include masts, anchor bolts and fence posts.

Advantages:

• Gaseous expansion system compensates for shrinkage and settlement in the plastic state
• No metallic iron content to cause staining
• Pre-packed material overcomes onsite batching variations
• Develops high early strength without the use of chlorides
• High ultimate strength ensure the durability of the hardened grout
• Free flow ensures high level of contact with load bearing area

                       
Packaging:

Conbextra GP-2 is supplied in 25 kg. moisture resistant.

Fosroc Conbextra GP2 in Ranchi

Buy Fosroc Conbextra GP-2 in Ranchi, Jharkhand at lowest price.

Ask for Quotation:
rpenterprisejsr@gmail.com
Contact Person: Mr. R. Prasad
Call : 07250852229
Our Website www.rpejsr.com

Conbextra® GP2

Free flow, high strength, non-shrink, cementitious precision grout

Description:

Conbextra GP2 is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for gap thicknesses up to 100mm.

            Conbextra GP2 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand ensures high early strength. The graded fillers are designed to assist uniform mixing and produce a consistent grout.

Uses:

Conbextra GP2 is used for precision grouting where it is essential to withstand static and dynamic loads. Typical applications would be the grouting of base plates of turbines, compressors, boiler feed pumps etc., It can also be used for anchoring a wide range of fixings. These include masts, anchor bolts and fence posts.

Advantages:

• Gaseous expansion system compensates for shrinkage and settlement in the plastic state
• No metallic iron content to cause staining
• Pre-packed material overcomes onsite batching variations
• Develops high early strength without the use of chlorides
• High ultimate strength ensure the durability of the hardened grout
• Free flow ensures high level of contact with load bearing area

                         
Packaging:

Conbextra GP-2 is supplied in 25 kg. moisture resistant.

Fosroc Conbextra GP2 in Barbil and Joda

Buy fosroc Conbextra GP-2 in odisha, Barbil, Joda, jharsuguda, Rourkela, Sambalpur, Raigarh at lowest price.

Ask for Quotation:
rpenterprisejsr@gmail.com
Contact Person: Mr. R. Prasad
Call : 07250852229
Our Website www.rpejsr.com

Conbextra® GP2

Free flow, high strength, non-shrink, cementitious precision grout

Description:

Conbextra GP2 is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for gap thicknesses up to 100mm.

            Conbextra GP2 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand ensures high early strength. The graded fillers are designed to assist uniform mixing and produce a consistent grout.

Uses:

Conbextra GP2 is used for precision grouting where it is essential to withstand static and dynamic loads. Typical applications would be the grouting of base plates of turbines, compressors, boiler feed pumps etc., It can also be used for anchoring a wide range of fixings. These include masts, anchor bolts and fence posts.

Advantages:

• Gaseous expansion system compensates for shrinkage and settlement in the plastic state
• No metallic iron content to cause staining
• Pre-packed material overcomes onsite batching variations
• Develops high early strength without the use of chlorides
• High ultimate strength ensure the durability of the hardened grout
• Free flow ensures high level of contact with load bearing area

                             
Packaging:

Conbextra GP-2 is supplied in 25 kg. moisture resistant.