Fosroc Conbextra GP2 in Dhanbad

Buy Fosroc Conbextra GP2 in Dhanbad and Bokaro

Ask for Quotation:
rpenterprisejsr@gmail.com
Contact Person: Mr. R. Prasad
Call : 07250852229
Our Website www.rpejsr.com

Conbextra® GP2

Free flow, high strength, non-shrink, cementitious precision grout

Description:

Conbextra GP2 is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for gap thicknesses up to 100mm.

Conbextra GP2 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand ensures high early strength. The graded fillers are designed to assist uniform mixing and produce a consistent grout.

Uses:

Conbextra GP2 is used for precision grouting where it is essential to withstand static and dynamic loads. Typical applications would be the grouting of base plates of turbines, compressors, boiler feed pumps etc., It can also be used for anchoring a wide range of fixings. These include masts, anchor bolts and fence posts.

Advantages:

• Gaseous expansion system compensates for shrinkage and settlement in the plastic state
• No metallic iron content to cause staining
• Pre-packed material overcomes onsite batching variations
• Develops high early strength without the use of chlorides
• High ultimate strength ensure the durability of the hardened grout
• Free flow ensures high level of contact with load bearing area

                   
Packaging:

Conbextra GP-2 is supplied in 25 kg. moisture resistant.

Fosroc Lokfix in Dhanbad

Buy Fosroc Lokfix in Jamshedpur, Dhanbad, Bokaro and Ranchi  @ lowest rate.

For Quotation Contact,

Mr. Prasad

07250852229

Email: rpenterprisejsr@gmail.com
Our Website www.rpejsr.com

Lokfix is a two-component polyester resin anchoring grout,  meeting the requirements of BS EN 1504-6: Anchoring of reinforced steel bars.

Supplied in pre-measured quantities, the material cures quickly to give consistent, high performance anchorages. The two versions of Lokfix available are :

Lokfix S25 : Pourable grade, 25 minute gel time at 20°C for use in vertical down holes where the hole is 8 to 40 mm greater in diameter than the bar.

Lokfix P25 : Thixotropic grade, 25 minute gel at 20°C for use in overhead or horizontal holes where the hole is up to 25 mm greater in diameter than the bar. The thixotropic nature of Lokfix P25 reduces flow of grout out of the hole.

• Rapid strength gain.
• Vibration resistant.
• Corrosion resistant.
• Non-expansive.
• Can be placed underwater

Fosroc Conbextra EP 10 In Jharkhand and Bihar

Epoxy Grout Conbextra EP 10 and EP 10 M

Description

High strength epoxy resin grout

Principal use

For grouting gaps ranging from 0.25mm to 10mm.it is an all liquid system consisting of base and hardner.

key properties

Compressive strength (N/mm³)

         1 Day     :     45

         3 Day     :     60

         7 Day     :    80

Tensile strength (N/mm²)     :    20

Flexural strength(N/mm²)     :   40

Pot life at 27ºC                    :   50min

Density(kg/mm³)                  :  aprox. 1050   

Advantages:

• Excellent durability - high compressive, flexural and tensile strengths ensure a long working life.
• Cost effective - high early strength gain promotes minimum downtime and early commissioning of plant.
• User friendly - simple, full pack mixing to ensure that the performance characteristics are achieved.
• Versatile - suitable for a wide range of loading situations including repetitive dynamic loads.
• Excellent in service performance - non-shrink capability ensures full surface to surface contact
  .

Buy Fosroc Conbextra EP 10 in Patna, Ranchi, Jamshedpur, Aurangabad, Jharkhand and Bihar.


For Quotation, Contact,
R. P. Enterprises
Mr. R. Prasad
Email: rpenterprisejsr@gmail.com
Mobile: 07250852229
Our Website www.rpejsr.com

Fosroc Conbextra EP 75 In Jharkhand and Bihar

Description:

Conbextra EP75 is a solvent free epoxy resin grout designed for grouting of gap widths of 10 to 75 mm. It is supplied as a three component system consisting of base, hardener and specially graded aggregate. The components are supplied in the correct mix proportions designed for whole pack mixing on site.

Creep resistant -to Improve resistance to deformation under constant loading.

Excellent durability - high compressive, flexural and tensile strengths ensure a long working life.

Cost effective - high early strength gain promotes minimum downtime and early commissioning of plant.

User friendly - simple, full pack mixing to ensure that the performance characteristics are achieved.

Versatile - suitable for a wide range of loading situations including repetitive dynamic loads.

Excellent in service performance - non-shrink capability ensures full surface to surface contact.

Buy Fosroc Conbextra EP75 in Jamshedpur, Ranchi, Patna, across Jharkhand and Bihar @ lowest rate.

Ask For Quotation,
email: rpenterprisejsr@gmail.com

Mobile: 07250852229
Our Website www.rpejsr.com