Fosroc Renderoc RG in Bihar

Buy Fosroc Renderoc RG in Patna, Muzaffarpur, Bhagalpur, Gaya, Hajipur at lowest rate.

For Quotation Contact,

Mr. R. Prasad
Mobile : 7250852229
Email : rpenterprisejsr@gmail.com

Renderoc RG

General Purpose, Non-Shrink, Cementitious Micro-Crete

Description:

Renderoc RG is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a free-flowing non-shrinkage repair micro concrete. The material is based Portland cement, graded aggregates and fillers and additives which impart controlled expansion characteristics in the plastic state, while minimising water demand. The low water requirement ensure high early strength and long-term durability.

For long repairs, the mixed Renderoc RG may be modified by the addition of 5mm to 12mm clean, graded, saturated surface dry aggregates at site.

Uses:

Renderoc RG is used to repairs for damaged reinforced concrete elements, particularly where access is restricted and where vibration of the placed material is difficult or impossible.

It is suitable for various structural strengthening measures such as encasement build-ups, jacketing etc.

Advantages:

·         Gaseous expansion system compensates for shrinkage and settlement in plastic state.

·         Can be pumped or poured into restricted locations.

·         Highly fluid to allow for placement without vibration.

·         Pre-packed to overcome site-batched variations.

·         Rapid strength gain to facilitate early reinstatement.

·         High ultimate strength and low permeability of cured repair.

·         Contains no chloride admixtures.

Packaging:

Renderoc RG is supplied in 25kg moisture resistant bags.

Auramix 300 in Bihar

Buy auramix 300 in Patna, Madhubani, Gaya, Muzaffarpur, Aurangabad, Sasaram, Chapra, and across Bihar at very low cost.

For Quotation, Contact,
Mr. R. Prasad
Email: rpenterprisejsr@gmail.com
Mobile: 7250852229
website: www.rpejsr.com


Auramix 300

Auramix 300 is a unique combination of the latest generation superplasticisers , based on a polycarboxylic ether polymer with long lateral chains. This greatly improves cement dispersion. At the start of the mixing process an electrostatic dispersion occurs but the cement particle’s capacity to separate and disperse. This mechanism considerably reduces the water demand in flowable concrete.

Auramix 300 combines the properties of water reduction and workability retention. It allows the production of high performance concrete and/or concrete with high workability.

Auramix 300 is a strong superplasticiser allowing production of consistent concrete properties around the required dosage.

Increased retardation controls the heat of hydration and

yields high ultimate strength

Higher E modulus

Improved adhesion to reinforcing and prestressing steel

Better resistance to carbonation

Lower permeability

Better resistance to aggressive atmospheric conditions

Reduced shrinkage and creep

Increased durability
Packaging : 200 kg

Minimum Order : 2 Tonnes.

Auramix 300 in Jharkhand

Buy auramix 300 in Ranchi, Jamshedpur, Hazaribagh, Ramgarh, Bokaro, Dhanbad and Across Jharkhand at very low rate.

For Quotation, Contact,                                                         
Mr. R. Prasad
R P Enterprises
Email: rpenterprisejsr@gmail.com
Mobile: 7250852229
Visit our Website www.rpejsr.com

Auramix 300

Auramix 300 is a unique combination of the latest generation superplasticisers , based on a polycarboxylic ether polymer with long lateral chains. This greatly improves cement dispersion. At the start of the mixing process an electrostatic dispersion occurs but the cement particle’s capacity to separate and disperse. This mechanism considerably reduces the water demand in flowable concrete.

Auramix 300 combines the properties of water reduction and workability retention. It allows the production of high performance concrete and/or concrete with high workability.

Auramix 300 is a strong superplasticiser allowing production of consistent concrete properties around the required dosage.

• Increased retardation controls the heat of hydration and
• yields high ultimate strength
• Higher E modulus
• Improved adhesion to reinforcing and prestressing steel
• Better resistance to carbonation
• Lower permeability
• Better resistance to aggressive atmospheric conditions
• Reduced shrinkage and creep
• Increased durability

Packaging : 200 Kg

Minimum Order : 2 tonnes